Site excavation work has started on a new build basement swimming pool in London. The pool will be 20 meters in length and will have 2 depths with sloped riser between them. The shallow water depth is 1.3m going down to a deep end water depth of 2m.
The pool will be a skimmer pool with a 150mm free-board to the surround floor tiles, it will also benefit from a remotely controlled hidden thermal slatted cover.
The pool hall will be built from scratch and will be located below an existing garden.
Working closely with the architects and mira construction, Brookforge will be designing, building, tanking, tiling and piping up everything pool related.
The plant room and all the associated equipment will be installed and tested by Brookforge as well as the pool hall air handling, dehumidification and ducting systems. Read More…
A recently completed project in Worcestershire was a new build fully insulated deck level pool. It benefited from the latest energy saving technology in the automated plant-room and a remote controlled slatted thermal pool cover which is hidden away in the floor of the pool.
Working directly with the Architect from first conception meant that everything pool related could be taken into account during the pool hall design.
The final result is a contemporary and stylish pool that blend modernity with functionality.
Slatted thermal pool cover benefits
The benefits of a slatted thermal pool cover should not be underestimated; not only will it keep your pool water warm whilst you are not using it thus saving on the running costs. They also prevent water evaporation, meaning your dehumidification system will have less work to do keeping the pool hall humidity stable and thus protecting the fabric of your pool hall.
A poolside steam room located at the end of a new build basement swimming pool in London. A steam room is popular addition to many of the new build swimming pools which we are involved with and can be made to fit in any available space.
We can design and install and custom made steam room to make use of any space which is available. This particular steam room features a custom wrapped side bench enabling users to stretch out and relax, it has just been tiled and is nearly ready for the installation of the glass front.
Finished poolside steam room now in Portfolio
An outdoor overflow pool is in the final stages of commissioning with the testing and calibrating of its thermal slatted cover.
Down on the south coast of England this pool was designed to be built using the Quadlock ICF system. Using an ICF system means the pool is highly insulated and the addition of a thermal slatted cover keeps heat losses to the minimum.
The features of this Outdoor Overflow Pool
This pool benefited from a hidden slotted overflow system, where an overflow channel is fitted below a 30mm slot between the coping and surround tile. The tiles are supported on a stainless steel mesh preventing larger debris from entering the overflow system. The overflow water is channeled back to a balance tank which is then pumped back to the plantroom via a multi-cyclone pre-filter to remove any smaller yet visible debris. As the outdoor overflow pool is highly insulated on the floor and walls, a thermal slatted cover was installed within a hidden cave in the pool wall.
Completed pool pictures now in portfolio
Final position is set, construction can begin
New Deck Level Pool Project
The pool will be ‘deck level’, meaning the water will be the same height as the floor in the new building. A slot between the tiles around the perimeter will receive overflowing water.
The pool features an insulated slatted cover, which is housed in a pit at one end of the pool. The cover is on a motorized reel, and can be controlled by a wireless remote.
The level of the water automatically rises and falls depending on cover position; when open, the water level rises until overflowing. When the cover is closed, the water level drops to minimize evaporation which occurs when in an overflowing state. Read More…